Cubieboard 2 : 安裝opensuse 12.3

這個講起來"天又黑一半了"!

首先openSUSE寫到安裝的程序如下：URL=http://en.opensuse.org/HCL:CubieBoard

---

1. Download the latest image at http://download.opensuse.org/repositories/devel:/ARM:/12.3:/Contrib:/sunxi/images/ and choose between:

1.JeOS image for a minimal system openSUSE-12.3-ARM-JeOS-cubieboard-*.raw.xz or
2.XFCE image for a graphical system openSUSE-12.3-ARM-XFCE-cubieboard-*.raw.xz


2. As root extract the image onto your SD-Card (replace sdX with the device name of your SD-Card). WARNING: all previous data on the SD-Card will be lost.

xzcat [image].raw.xz | dd bs=4M of=/dev/sdX; sync


3. Insert the SD-Card with the openSUSE image into your CubieBoard.
4. Connect the CubieBoard to your PC via serial port.
   
5. Connect the CubieBoard to your monitor via DVI or HDMI. (optional)
   
6. Power on the CubieBoard.
   
7. Walk through the first boot steps on the serial console.
   
8. Have a lot of fun...

---

第4步看到了沒==>Connect the CubieBoard to your PC via serial port.
現在的電腦去那裏找Serial Port呀!
(請看官接下來看)
接下來請看：　CubieBoard A20 用户手册.pdf

3.3刷機步驟 ----沒了，以下沒寫了........昏倒....
繼續看4
TTL線接法，注意紅色不要接............昏倒，什麼是TTL線....原來是USB to TTL線
接那裏，紅色不要接 ..

---

原來這個部分是設定Cubioeboard的，然後....又沒了!
回過頭來，看到OpenSuSE的設定的第4步，就是在講這個，去設定啟動boot.
所以，這樣，我這種新手就叫小白!

(以下的等今天USB to TTL Serial線拿到了再說，話說一個月又到了，我又開始跑公文了)

==============>>我確定先暫時放棄安裝網頁版的OpenSuSE，但是我開始自製有用的boot.image!